Jaguar XJ - Manual (Page 33)

R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: jaguar; MODEL: XJ
Exterior lights
33
Exterior lights LIGHTING CONTROL
1. With the headlamps on, push the switch
away from the steering wheel to select high
beam. The blue warning indicator on the
instrument panel will illuminate.
2. Pull the switch towards the steering wheel
and release to flash the high beam on and
off. The high beam will remain on for as
long as the switch is held.
3. Side lights.
4. Low beam.
5. When ambient light fades the side lights
and headlamps will switch on
automatically.
6. Exit delay of 30 seconds.
7. Exit delay of 60 seconds.
8. Exit delay of 120 seconds.
Note: If the rotary control is in the AUTO
position there will be no exit delay and the
headlamps will extinguish when the ignition
system is turned off.
Press the headlamp button on the Jaguar
Smart Key to switch off the headlamps during
an exit delay period.
If the rotary control is moved to the OFF
position, with high beam still activated, both
low and high beam will be extinguished. Both
low and high beam will illuminate when the
headlamps are turned on again.
DIRECTION INDICATORS
In addition to normal operation, the indicators
will operate 3 times (e.g. to indicate a lane
change) if the stalk is briefly pushed up or
down.
DAYLIGHT RUNNING LAMPS
In some countries, with the rotary control in
the OFF or AUTO position, low beam
headlamps, side lamps, tail, number plate
lamps and, where fitted, side marker lamps will
switch on automatically with the following
conditions:
• The ignition is on.
• The gear selector is out of park.
• The parking brake is not applied (is
released) - market dependent.