beautypg.com

Seat belt safety, Occupant safety – Jaguar XJ User Manual

Page 24

background image

L

(FM8)

SEMCON JLR OWNER GUIDE VER 1.00

EURO

LANGUAGE: english-en;

MARQUE: jaguar;

MODEL: XJ

Occupant safety

24

Never place anything between you
and the seat belt in an attempt to
cushion the impact in the event of
an accident.

5. With the seat belt correctly positioned,

place the metal tongue into the buckle
nearest to you. Press it in until a click is
heard. Ensure that all slack has been taken
up by the retractor and the belt fits tightly
across the hips.

Note: When releasing the seat belt it is
advisable to hold the belt before pressing
the release button. This will prevent the
belt from retracting too quickly.

To release the seat belt, press the red
button.

6. Use of seat belts during pregnancy:

Position the lap strap comfortably across
the hips beneath the abdomen. Place the
diagonal part of the seat belt between the
breasts and to the side of the abdomen.

Position the seat belt correctly for
the safety of the mother and
unborn child. Never wear just the
lap strap, and never sit on the lap
strap whilst using just the
shoulder strap.

Never place anything between you
and the seat belt. It can be
dangerous and reduce the
effectiveness of the seat belt in
preventing injury.

Ensure that the seat belt is not
slack or twisted.

7. Tether strap anchorages. See 28,

INSTALLING TETHER ANCHORAGE CHILD
RESTRAINTS
.

Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no
circumstances are they to be used
for adult seat belts, harnesses or
for attaching other items or
equipment to the vehicle.

If a child seat or restraint system
is to be fitted to the centre seating
position, the centre armrest must
be in the stowed position (folded
into the seat).

Note: A tether anchorage is provided for
the centre seat position. Do not use this
anchor position with an ISOFIX child seat.

SEAT BELT SAFETY

Care should be taken to avoid
contamination of the webbing with
polishes, oils and chemicals, and
particularly battery acid. Cleaning
may safely be carried out using mild
soap and water.

The belt should be replaced if
webbing becomes frayed,
contaminated or damaged.

It is essential to replace the entire
assembly after it has been worn in a
severe impact, even if damage to the
assembly is not obvious.

Do not carry hard, fragile or sharp
items between your person and the
seat belt.

Seat belts should be worn by all
vehicle occupants, for every journey,
no matter how short.

When using seat belts to restrain
items other than occupants, take care
to ensure that the belts are not
damaged, or exposed to sharp edges.