Voice tutorial, Voice training, Voice session interruptions – Jaguar XJ User Manual
Page 120: Voicetags, Voice control
L
(FM8)
SEMCON JLR OWNER GUIDE VER 1.00
EURO
LANGUAGE: english-en;
MARQUE: jaguar;
MODEL: XJ
Voice control
120
VOICE TUTORIAL
To listen to a tutorial detailing the operation of
the Voice system:
• Briefly press the Voice button to start a
voice session.
• Wait for the tone to sound, then say Voice
tutorial.
Alternatively, the tutorial can be selected using
the touch screen, as follows.
• Select Setup from the touch screen Home
menu.
• Select Voice from the Setup menu.
• Select Op.. guide from the Voice settings
menu.
• Select Voice tutorial.
The voice tutorial can be cancelled at any time
by selecting Cancel on the on-screen pop-up
or by pressing and holding the Voice button.
VOICE TRAINING
This is a feature designed to enable the system
to better recognise the vocal characteristics of
a user, once the training has been completed.
To carry out Voice training:
• Select Setup from the Home menu.
• Select Voice and from the Setup menu.
• Select Voice training from the Voice
settings menu.
• Select User 1 or User 2, to start the
training.
• Follow the on-screen and audible
instructions.
The training session can be cancelled at any
time by selecting Cancel from the on-screen
pop-up or by pressing and holding the Voice
button.
VOICE SESSION INTERRUPTIONS
Certain conditions will cause the current voice
session to be cancelled, as follows:
• If a high priority warning appears in the
message centre.
• If there is no user input for a sustained
length of time.
Press the Voice button to start a new voice
session.
Note: It is not possible to start the new voice
session until the warning has been displayed
for at least 4 seconds.
VOICETAGS
Voicetags enable the user to personalise the
Voice system so that a single name can be used
to call-up a navigation destination, telephone
number or radio channel.
To add a Voicetag:
• Select Setup from the Home menu.
• Select Voice from the Setup menu.
• Select Voicetags from the Voice settings
menu.
• Select the system which the Voicetag is to
activate (Phone, Navigation or Radio).
Follow the on-screen and audible instructions.