JVC VN-685U - Manual (Page 79)

79
A IP Setting For setting the DHCP client function.
Connect the camera to a network environment with a DHCP server when
DHCP is to be enabled.
If the DHCP server does not exist when [IP Setting] is set to
ADHCP
Enable B, the camera will start running with IP address 192.168.0.2 and
subnet mask 255.255.255.0 in about 2 minutes after startup.
Refer to [IP Address Settings] (
A Page 36) for the IP address.
B IP Address For setting the IP address of the camera.
C Subnet Mask For setting the subnet mask of the camera.
D Default Gateway For setting the default gateway of the camera.
Set as
A0.0.0.0B when a default gateway is not set.
E Host Name For setting the host name of the camera.
Specify a name using alphanumeric characters, hyphen (-) or period (.).
Underscores (_) cannot be used.
F DNS Server For setting the address of the DNS server.
G MAC Address The MAC address of the camera is displayed in a hexadecimal number.
H IP Protocol For setting IPv6 to AOnB or AOffB. (IPv4 is set to AOnB at all times. ) When
IPv6 is set to AOnB in a network that supports IPv6, the address appears in
the [IPv6 Address] field. If the network does not support IPv6, ADisableB
appears in the [IPv6 Address] field. Camera will restart if this item is altered.
Wait for about one minute before operation of the unit is enabled.
I IPv6 Address Displays the IPv6 address.