JVC VN-685U - Manual (Page 113)

113
Ⅵ PTZ Control For operating the camera and adjusting the angle and image quality of the
position to be registered.
A Auto
Function For selecting the operation.
[Start] : Start the selected Auto function.
[Stop] : Stop the running Auto function.
Memo :
● When AAuto PatrolB is selected, the patrol mode list is displayed.
● When AIntelligent TrackingB is selected, the target’s list is displayed.
Auto Pan : The configured Auto Pan operation is performed.
( A Page 109)
Auto Patrol : The configured Auto Patrol operation is executed. Select
AAuto PatrolB.(A Page 72)
Auto Trace :The configured Auto Trace operation is performed.
( A Page 111)
Auto Tracking : Auto tracking is performed. ( A Page 67)
Motion detection does not work during Auto Tracking.
Intelligent Tracking
: Intelligent tracking is performed. ( A Page 116)
Note:
● When the [Mode] item of [Auto Return] is set to AAuto PatrolB and Auto
Patrol starts in this screen, the AAuto PatrolB mode of [Auto Return] will
be changed to the mode that was started in this screen. [Auto Return]
( A Page 66)
● When AAuto PanB starts, the camera will repeat the left rotate, right rotate
or return operations.
● When AAuto PatrolB starts, the camera will complete a series of
operations and return to the start position, and then repeat the entire
process. When Auto Trace starts, the camera will perform a series of
operations before returning to the start position. It will resume after 30
seconds. If Auto Return function is set, the Auto function that was started
manually is stopped when
AAuto ReturnB starts.
B Preset
Position For selecting the preset position. When the selected position has been
registered, the camera will move to the selected position.
[Setting range: HOME, 1 to 19]