JVC VN-685U - Manual (Page 52)

52
Setting Using Internet Explorer
Camera Page (continued)
Setting (continued)
D Gamma To alter the appearance of dark areas in a video image, adjust the gamma
curve.
0 : Gamma correction suitable for CRT is performed.
1 : Gamma correction suitable for some LCDs is performed.
2 : Do not perform gamma correction. This setting is suitable for
some LCDs.
Active : The most appropriate gamma correction is applied according to
the darkness of the screen. Select the level under [Active
Gamma Level].
[Setting value:0, 1, 2, Active]
Memo :
● The set value is fixed when the [Monitor Type] B is set to ALCD1B,
ALCD2B, or ACRTB.
Active Gamma
Level This adjusts the effect when [Gamma] D is set to AActiveB.
Objects with little luminance difference BDecrease the number
Objects with large luminance difference BIncrease the number
[Setting range:-5 to 0 to 5]
Memo :
● The color may appear different from the actual one depending on the
object.
● Noise interference and hue changes may appear prominent depending
on the brightness of the object but this is not a malfunction.
● This feature can only be configured when [Gamma] D is set to AActiveB.
E Enhance
Frequency For setting the type of edge enhancement.
Low : Enhanced edges become thicker.
High : Enhanced edges become thiner.
[Setting value:Low, High]
Memo :
● The set value is fixed when the [Monitor Type] B is set to ALCD1B,
ALCD2B, or ACRTB.
F Enhance Level For setting the intensity of edge enhancement.
Larger value : Increases the intensity of edge enhancement.
Smaller value : Decreases the intensity of edge enhancement.
[Setting range:-5 to 0 to 5]
G Color Level For adjusting the color level.
Larger value : Increases the color level.
Smaller value : Decreases the color level.
[Setting range:-5 to 0 to 5]