Jensen HD5212 - Manual (Page 18)

14
HD5212
6. Press the BAND/ENTER button to enter the second number and move
to the third position.
NOTE: Use the TUNE/CH >> or TUNE/CH << button (10 and 11) to move
between the first and third positions.
7. Turn the rotary encoder again to select the third digit of the channel you
want to tune to (0 - 9).
8. Press the BAND/ENTER button to enter the third number and access
the channel.
Category Mode
To select stations in a specific category, perform the following steps.
1. Press the SELECT button (5) twice to select “CATEGORY” mode.
2. Press the CAT/DIR /\ and \/ buttons (17, 18), labeled “5” and “6”, to
select the desired category.
3. Press the BAND/ENTER button (3) to confirm.
4. Once a category is selected, use the TUNE/CH >> or TUNE/CH <<
buttons to select stations in the current category.
To exit category mode, press SELECT.