Jensen HD5212 - Manual (Page 17)

13
HD5212
Satellite Radio Operation
Listeners can subscribe to XM® Radio on the Web by visiting
www.xmradio.com, or by calling (800) 967-2346. Customers should
have their Radio ID ready (see “Displaying the Identification (ID)
Code”). Customers can receive a limited number of free-to-air
channels without activation.
Listeners can subscribe to Sirius® Radio on the Web by visiting
www.sirius.com, or by calling (888) 539-SIRIUS. Customers should
have their Sirius ID ready (Sirius ID is located on the Satellite Radio
Tuner, sold separately). Customers can listen to music samples by
tuning to channel 184.
Accessing Satellite Radio Mode
To switch to satellite radio mode, press the SRC button (2) until “XM
RADIO” or “SIRIUS” appears on the display. This will not be displayed
unless the unit is connected an optional Sirius or XM receiver.
Displaying the Identification (ID) Code
Before you listen to satellite radio, you must subscribe to the service using
your radio’s identification number. To display the radio ID, press the TUNE/
CH << button (11) to access channel 000. The screen displays the radio ID
where the channel name is usually displayed.
Selecting a Station
Press the TUNE/CH >> or TUNE/CH << button (10 and 11) to change to
another station. Press and hold the TUNE/CH >> or TUNE/CH << button for
more than one second to fast forward or fast reverse through the stations.
Preset Stations
Press the BAND button (3) to change between three user preset channel
groups. Each channel group stores up to six preset stations. You can store
and recall a total of 18 preset stations.
Store a Station
1. Select a channel group, then select a station.
2. Hold a preset button (13 – 18) for three seconds. The preset number
appears in the display.
Recall a Station
1. Select a channel group.
2. Press a preset button (13 – 18) to select the corresponding stored
station.
Tuner Modes
Press the DISP button (7) to change the tuner mode to the following options
in the order listed.
• Channel Name
• Genre (News, Sports, Hits, Kids, etc.)
• Artist name
• Song Name
If the selected channel name, artist, or title exceeds eleven characters, the
display information will scroll twice upon selection.
Direct Tuning Mode
To enter a station directly, perform the following steps.
1. Press the SELECT button (5) to enter direct tuning mode.
2. Turn the rotary encoder to display “XM CH_ _ _” or “SR CH_ _ _”.
3. Turn the rotary encoder again to select the first digit of the desired
channel (0, 1, or 2).
4. Press the BAND/ENTER button (3) to enter the first number and move
to the second position.
5. Turn the rotary encoder again to select the second digit of the desired
channel (0 - 9).
PRESS
RPT SHF SCN 1 2 3 4 5 6
SEL
CAT/DIR AUX IN
MONO DISP EQ
BAND
SRC
TUNE/CH
MUTE
A~Z
0~9
PS
ENTER
IPOD
FILE/FOLDER HD5212 SAT
READY
1 2 4 7
10
11
3
5 6 8 9 20
12
19 21
13 14 16 15 17 18 22