JVC TH-45 - Manual (Page 78)

16
English
Speaker Settings
Setting the Speaker Information
To obtain best possible surround, register the center speaker (C–SP)
and rear speakers (R–SP) settings after completing all the
connections.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1 again.
From the remote control ONLY:
1
Press SETTING repeatedly until one of
following speakers (with the current
setting*) appears on the display.
• Each time you press the button, the indication in the main
display changes as follows:
C–SP (Center speaker) : To register the center speaker
information.
R–SP (Rear speakers) : To register the rear speakers
information.
* “SMALL” is the initial setting.
If you have already changed the setting, “NONE” will be
shown.
2
Press
3 (or 2) repeatedly to
select the appropriate speaker
information.
• Each time you press the button, the
speaker information changes as
follows:
SMALL : Normally select this.
NONE : Select this when you do not want to use the
corresponding speaker.
3
Repeat steps
1
and
2
to select the appropriate
information for the other speaker.
F–SP SW–SP C–SP R–SP
(R–DEL) (C–DEL)
Normal indication
(canceled)
SETTING
ENTER
SMALL NONE
DISPLAY
B.SEARCH
DOWN
REW
UP
FF
F.SEARCH
RETURN STEP TV/VIDEO
TV VOLUME
TV CHANNEL
SUBTITLE
TOP MENU
TV
STANDBY/ON
AUDIO
VCR OFF ON
VCR
CONTROL
TUNER PRESET
ENTER
VOLUME
MENU
AUDIO/
FM MODE
VCR CHANNEL
TUNING
DVD FM/AM AUX MUTING
1 2 3
4 5 6
7 8 9
0
REMAIN
PROGRAM
D.R.C.
SETUP
SLEEP
EFFECT
DSP MODE
TEST
PRO LOGIC
SETTING
SOUND
CLEAR
REPEAT
ANGLE
SLOW
SEARCH
A-B REPEAT
ZOOM
2 3
PRO LOGIC
SETTING
Front speaker setting and subwoofer setting are fixed. Even you
can select these items by pressing SETTING, you cannot change
their settings.
EN10-17TH-A5[C]f.pm6 01.12.25, 13:58 16