JVC HR-XVS20EK - Manual (Page 78)

Filename [XVS20EK_10Subsidiary.fm]
Masterpage:Left+
78
Page 78 March 28, 2003 6:57 pm
SUBSIDIARY SETTINGS (cont.)
Tuner Set
Your unit needs to memorize all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR buttons without going through any
vacant channels.
Auto Channel Set
A
Turn on the unit.
Press 1.
B
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
C
Access the Main Menu screen.
Press SET UP MENU.
D
Perform Auto Channel Set.
● When you have connected
the unit to a TV offering T-V
Link via a fully-wired 21-pin
SCART cable (
੬
pg. 15), the
unit automatically performs
the Preset Download and the
T-V LINK screen will appear.
(
੬
pg. 18)
● The Auto Set screen appears,
and remains on screen while
the unit searches for
receivable stations.
As Auto Channel Set
progresses, the “q” mark on the TV screen moves from left to
right. Wait until the TV screen as shown in step
E appears.
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/S-VHS/DVD switch to the right.
IMPORTANT
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set
Up or by Preset Download. (
੬
pg. 16, 18)
— you have moved to a different area or if a new station
starts broadcasting in your area.
Press rt to move the
highlight bar (pointer) to
“AUTO CH SET”, then press
OK or e twice.
Beginning End
XVS20EK_01.book Page 78 Friday, March 28, 2003 7:00 PM