Pg. 33, Pg. 33, 3 – JVC HR-XVS20EK User Manual
Page 33
Masterpage:Right-No-Heading
33
Filename [XVS20EK_07S-VHS.fm]
Page 33
March 28, 2003 6:55 pm
E
Set the tape speed.
Press SP/LP/EP (p).
F
Set the PDC mode.
Press PDC (number key “7”) to select “ON” or “OFF”.
● If “VPS/PDC ON” is displayed on the TV screen, “PDC” is set
to “ON”.
● If “VPS/PDC OFF” is displayed on the TV screen, “PDC” is set
to “OFF”.
● VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this unit.
G
Return to the normal screen.
Press PROG or OK. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears.
● Repeat steps B – G for each additional programme.
H
Engage the unit’s timer mode.
Press # (TIMER). The unit turns off automatically and
“#” appears on the front display panel.
● To disengage the timer mode, press # (TIMER) again.
NOTES:
● To Change The Stop Time:
— press STOP +/– after pressing OK in step
D. You can
compensate for anticipated programme schedule delays.
● To Timer-Record Weekly Or Daily Serials:
— after pressing OK in step
D, press WEEKLY (number key
“9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
● You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. (
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
Satellite Receiver Users
To timer-record a satellite broadcast using the VIDEO Plus+
system:
A Set “L-2 SELECT” to “A/V”. (
B Perform steps A – H.
C Set the satellite receiver to the appropriate channel before
the selected programme begins.
D Leave the satellite receiver’s power on.
XVS20EK_01.book Page 33 Friday, March 28, 2003 7:00 PM