Jensen VM9424 - Manual (Page 16)

11
VM9424
to access auxiliary devices. You cannot directly control external devices
connected to the AV IN connector. For information regarding the use of USB
devices, see “Accessing a USB Device” on page 28.
Volume Adjustment
To increase or decrease the volume level, turn the VOL rotary encoder (5) on
the front panel or press the VOL-/+ buttons (15, 16) on remote control. When
the volume level reaches “0” or “40”, a beep sounds, indicating that the
adjustment limit has been reached. The LCD or TFT screen displays the
volume level for 3 seconds.
Audio Control Menu
The Audio Control feature allows you to easily adjust your audio system to
meet the acoustical characteristics of your vehicle, which vary depending on
the type of vehicle and its measurements. Proper setting of the Fader and
Balance boosts the effects of the cabin equalizer.
Press the button on the screen, the VOL rotary encoder (5) on the front of
the unit, or the SEL button (12) on the remote control to display the audio
menu.
• Use the touch screen / buttons to adjust the settings for an audio
feature.
• To adjust an audio feature using the remote control, perform the following
steps:
a.
Press the / buttons (26, 27) to highlight the audio feature to be
adjusted.
b. Press the / buttons (28, 29) to adjust the selected feature to the
desired setting.
Table 2: Audio Adjustments
Audio Function Adjustable Preset Audio Function Adjustable Range
EQ SETTING User TREBLE -7 to 7
Flat MIDDLE -7 to 7
Jazz BASS -7 to 7
Pop BALANCE -9 (Left) to 9 (Right)
Classical FAD -9 (Rear) to 9 (Front)
Rock SUBWOOFER -7 to 7
News MIDDLE -7 to 7
Urban
Rave
Movie
Techno