JVC CA-NXG9 - Manual (Page 85)

10
Listening to the Radio
To select the AM tuner interval
spacing
Some countries space AM stations 9 kHz apart, and
other countries use 10 kHz spacing.
1
Select “TUNER AM.”
2
Select the AM tuner interval spacing.
To select 9 kHz:
AM 9kHz
(while holding...)
To select 10 kHz:
AM 10kHz
(while holding...)
To select the band (FM or AM)
To turn off (standby) the System
The STANDBY lamp on the main
unit lights in red.
• A small amount of power is
always consumed even while on
standby.
To open/close the front panel
On the remote: On the main unit:
1 sec
To drop the volume in a moment
To restore the volume, press
again, or adjust the volume level.
For private listening
Connect a pair of headphones to the PHONES
jack on the main unit. The sound will no longer
come out of the speakers. “HPHONE IN” appears
on the display for a while. Be sure to turn down
the volume before connecting or putting on the
headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System
with the volume set at an extremely
high level; otherwise, the sudden blast
of sound may damage your hearing,
speakers and/or headphones when you
turn on the System or start playback.
How to select a number
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press
10, 1, then 5.
To select number 30, press
10, 3, then 0.
To select number 125, press
10, 10, 1, 2, then 5.
text_EN_NXG7G3.indb 10 text_EN_NXG7G3.indb 10 08.7.14 11:41:40 AM 08.7.14 11:41:40 AM