Recording and editing operations, Remote control, Main unit – JVC CA-NXG9 User Manual
Page 103
28
SHIFT
CD
3
USB REC REC/PLAY USB
CHARA
TITLE/DEL
CANCEL
4, ¢
ENTER/SET
7
DVD/CD
6
Recording and Editing Operations
Remote control
Before You Start Recording
• It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
• The recording level is not affected by the volume.
• Sound adjustments (see page 15) does not affect
recordings.
• Random Play and Repeat mode are canceled in the
recording mode.
• You cannot record or edit tracks while Mic Mixing
(see page 33) is activated or while you are setting My
Sound (see page 16).
• You can record up to 999 tracks to the USB device. If
you try to record a track after recording 999 tracks,
“TRACK FULL” appears on the display and the track
will not be recorded.
• The tracks which are recorded to the USB device will
be converted into MP3 format.
• You cannot start recording into a USB device while
“READING” is shown on the display.
• Some USB devices have limit of recordable track
number in the root group. Select another group or
make a new group to record tracks when the number
of target tracks to record is over the limit.
• Do not disconnect a USB device while playing/
recording/editing. It may cause malfunction.
About SCMS (Serial Copy Management System)
The System uses the Serial Copy Management System
which allows only first-generation digital copies to be
made of premastered software such as regular CDs.
If you try to record from a duplicated CD-R or CD-RW
into the USB device, “SCMS ERROR” appears on the
display.
1st generation
2nd generation
Number
buttons
Main unit
text_EN_NXG7G3.indb 28
text_EN_NXG7G3.indb 28
08.7.14 11:42:00 AM
08.7.14 11:42:00 AM