How to attach the core filter, For ca-nxg9 – JVC CA-NXG9 User Manual

Page 72

How to attach the core filter

Attach the provided core filter to the USB cable to reduce interference.

1 Release the stopper of the core filter.
2 Run the USB cable through the core filter, leaving approx. 2 cm between the unit-side end

of the USB cable and the core filter.
Firmly wind the USB cable once inside the cutout of the core filter.

3 Close the core filter until you hear a clicking sound.
• Do not damage the USB cable by applying excessive power when winding.
• When you connect USB cables to both the USB1 terminal and the USB2 terminal, attach the

core filter to the cable connected to the USB2 terminal.

To the System

0808WMKMDWJMM

CA-NXG9/NX-G5

COMP

CT COMPONENT SYSTEM

For CA-NXG9:

Mains (AC) Line Instruction (not applicable for Europe,
U.S.A., Canada, and U.K.)
CAUTION for mains (AC) line

(Excluding Saudi Arabian model and Australian model)

BEFORE PLUGGING IN, do check that your mains (AC) line voltage
corresponds with the position of the voltage selector switch provided
on the outside of this equipment and, if different, reset the voltage
selector switch, to prevent from a damage or risk of fire/electric shock.

Stopper

USB cable

2 cm

Cover_NXG9G5_U_eng.indd 1

08.7.28 8:21:00 PM