JVC CA-NXG9 - Manual (Page 67)

64
MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2, ASF or DivX
files are not played back.
] The disc or the USB mass storage class device may
contain different types of files (ex. MP3/WMA/
WAV/JPEG). In this case, you can only play back
the files selected by pressing FILE TYPE (see page
12).
] You have changed the “FILE TYPE” setting
after the System read the disc or the USB mass
storage class device. In this case, reload the disc or
disconnect the USB mass storage class device and
connect it again.
The disc sound is discontinuous.
] The disc is scratched or dirty.
No subtitle appears on the display though you have
selected the initial subtitle language.
] Some DVDs/DivX files are programmed not to
display any subtitle initially. If this happens, press
SUBTITLE after starting playback (see page 23).
Audio language is different from the one you have
selected as the initial audio language.
] Some DVDs/DivX files are programmed to always
use the original language initially. If this happens,
press AUDIO/MPX after starting playback (see
page 22).
The disc tray does not open or close.
] The power cord is not plugged in.
] Child Lock is in use. “LOCKED” appears on the
display (see page 21).
Recording and Editing Operations
Unable to record into the USB device.
] The capacity of the USB device is full. Erase some
tracks.
] There have been 999 tracks or group on the USB
device you want to record into. Erase unwanted
tracks.
] The USB device is write-protected.
] The connected USB device is incompatible to this
System.
Unable to assign title to tracks on the USB device.
] When a track is damaged, you cannot edit that
track. In this case, turn off the System and turn on
again.
] The USB device is write-protected.
Bluetooth Operations
Sound of a Bluetooth audio player does not come
out of the speakers. (The Bluetooth indicator is on.)
] Another player than the one you want to listen to
is connected to the System. Change the device to
be connected to the System (see page 40).
Sound of a Bluetooth audio player does not come
out of the speakers. (The Bluetooth indicator is
flashing.)
] Connection is not established. Try pairing again
(see page 39).
Sound of a Bluetooth audio player does not come
out of the speakers. (The Bluetooth indicator is off.)
] The Bluetooth adapter is not connected properly.
] “Bluetooth” is not selected as the source.
Sound of the System does not come out of Bluetooth
headphones. (The Bluetooth indicator is on.)
] Another pair of headphones than the one you
want to use is connected to the System. Change
the headphones to be connected to the System (see
page 42).
Sound of the System does not come out of Bluetooth
headphones. (The Bluetooth indicator is flashing.)
] Connection is not established. Try searching for
the device (“SEARCH DV?”) again (see page 40).
Sound of the System does not come out of Bluetooth
headphones. (The Bluetooth indicator is off.)
] The Bluetooth adapter is not connected properly.
] The Bluetooth transmitter is not activated (see
page 41).
A Bluetooth device cannot be paired with the
System.
] Set the System ready to be paired (see page 39 or
40).
] Input the right PIN code (see page 41).
] Refer to the manual of the Bluetooth device for the
details of pairing.
The sound quality is not good.
] Change the SOUND QLTY setting to “HIGH” (see
page 43).
The sound is discontinuous.
] A wireless LAN or a microwave oven is
interfering.
text_EN_NXG9G5.indb 64 text_EN_NXG9G5.indb 64 08.8.5 10:53:14 AM 08.8.5 10:53:14 AM