JVC CA-NXG9 - Manual (Page 82)

7
Front panel
From the USB mass storage class device
To the headphones
From the digital audio player
To the microphones (only for CA-NXG7)
See page 33.
2
NTSC / PAL NTSC or PAL Interlaced scanning.
For a conventional NTSC or PAL
TV.
NTSC PRGR/
PAL PRGR NTSC or PAL Progressive scanning.
For a progressive NTSC or PAL TV.
• The PRGR indicator lights up on
the display.
Changing the Color System and Scanning
Mode
You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the
COMPONENT jacks, you can enjoy a high quality
picture by selecting progressive scanning mode.
• You can change the setting only while playback is
stopped.
1
• You cannot connect JVC Everio camcorder to the
USB REC/PLAY ( ) terminal of the System.
• Noise and static electricity may stop the USB mass
storage class device sound. In this case, disconnect
and connect the USB mass storage class device again
after turning off the System.
When connecting a digital audio player
Stereo mini plug
(not supplied)
From audio output (or headphone
out, etc.)
• See page 14 for audio input level.
When connecting a USB mass storage class device
USB cable (not
supplied)
• When connecting with a USB cable, use the USB 2.0
cable whose length is less than 1 m.
• You can connect a USB mass storage class device
such as a USB flash memory device, hard disk drive,
multimedia card reader, etc. to this System.
• You cannot connect a computer to the USB REC/
PLAY ( ) terminal of the System.
text_EN_NXG7G3.indb 7 text_EN_NXG7G3.indb 7 08.7.14 11:41:36 AM 08.7.14 11:41:36 AM