Integra DTR-9.1 - Manual (Page 66)

66
OPEN/COLSE REC
AUDIO MUTING
DISC TRACK
DVD CD
PH TUN T2 T1
V1
STEREO
1 2 3
6 5 4
7
+ 10 0 ENT
8 9
SURROUND THX DSP
LEVEL + CH SEL Re-EQ
LEVEL – DIMMER LATE NIGHT
DIRECT DSP
V2 V3 V –
MODE MACRO
MODE buttons
HOME THEATER CONTROLLER
RC-418M
Using a Macro function
Erasing a macro from the MODE MACRO
button
1. Press and hold down the desired MODE
button, press the MODE MACRO button, and
then release both buttons.
When you press the MODE button, the SEND/LEARN
indicator lights and that mode appears in the dis-
play. When you press the MODE MACRO button, the
indicator turns off. When you release the buttons,
the indicator flashes once and “M 01” appears in
the display.
2. Press the MODE MACRO button again.
The SEND/LEARN indicator flashes twice slowly and
“CLEAR” appears in the display. The macro pro-
grammed to the MODE button pressed in Step 1
above is erased.
Notes:
• If no button is pressed for more than 30 seconds dur-
ing the programming, the SEND/LEARN indicator
flashes three times quickly, “ERROR” appears in the
display, and the remote controller exits the pro-
gramming mode. Resume from Step 1.
• Be aware that if you press a button other than
MODE MACRO button in Step 2, then you will in ef-
fect be overwriting the previous macro with a new
macro.
Erasing a direct macro from the DIRECT
MACRO button
1. Press and hold down any one of the eight
MODE buttons, press the DIRECT MACRO
button, and then release both buttons.
When you press the MODE button, the SEND/LEARN
indicator lights and that mode appears in the dis-
play. When you press the DIRECT MACRO button,
the indicator turns off. When you release the but-
tons, the indicator flashes once and “M 01” appears
in the display.
2. Press the DIRECT MACRO button again.
The SEND/LEARN indicator flashes twice slowly and
“CLEAR” appears in the display. The macro pro-
grammed to the DIRECT MACRO button is erased.
Notes:
• If no button is pressed for more than 30 seconds dur-
ing the programming, the SEND/LEARN indicator
flashes three times quickly, “ERROR” appears in the
display, and the remote controller exits the pro-
gramming mode. Resume from Step 1.
• Be aware that if you press a button other than DI-
RECT MACRO button in Step 2, then you will in effect
be overwriting the previous direct macro with a new
direct macro.
OPEN/COLSE REC
AUDIO MUTING
DISC TRACK
DVD CD
PH TUN T2 T1
V1
STEREO
1 2 3
6 5 4
7
+ 10 0 ENT
8 9
SURROUND THX DSP
LEVEL + CH SEL Re-EQ
LEVEL – DIMMER LATE NIGHT
DIRECT DSP
V2 V3 V –
DIRECT MACRO
MODE buttons
HOME THEATER CONTROLLER
RC-418M