Integra DTR-9.1 - Manual (Page 60)

60
Using remote controller
Controlling an Integra DVD player
Make sure that you point the remote controller toward
the sensor on the Integra DVD player.
1. Press the DVD MODE button.
“DVD” appears in the remote controller display.
2. Press the desired operation button. The
buttons shaded in the figure to the left are the
operation buttons that can used to control an
Integra DVD player.
POWER ON/STNBY: Turns the DVD player on and off
DVD SET: Enters the DVD setup menu
DVD player on-screen buttons
MENU: Displays the menu
: Moves the cursor
ENTER: Confirms the selection
RETURN: Return buttons
DVD player buttons
: Chapter/Track Down
: Chapter/Track Up
: Play
: Stop
: Fast Reverse
: Fast Forward
: Pause
OPEN/CLOSE r: Open/close the disc tray
0, 1 to 9, +10: Numeric keys
ENT: Confirm
You may also use the following buttons:
VOL : Adjusts the volume at the DTR-9.1
MUTING: Activates the muting function at the DTR-9.1
Note:
The ENT button on the bottom right of the numeric keys
has the same function as “ENTER” of the ENTER/cursor
button.
SAT, CABLE, VCR, and TV MODE buttons
No preset codes are programmed into the SAT, CABLE,
VCR, and TV MODE buttons. You can use these buttons
to program the remote controller signals of other
devices (see page 61).
You may use the following buttons:
VOL : Adjusts the volume at the DTR-9.1
MUTING: Activates the muting function at the DTR-9.1
OPEN/COLSE REC
AUDIO MUTING
DISC TRACK
DVD CD
PH TUN T2 T1
V1
STEREO
1 2 3
6 5 4
7
+ 10 0 ENT
8 9
SURROUND THX DSP
LEVEL + CH SEL Re-EQ
LEVEL – DIMMER LATE NIGHT
DIRECT DSP
V2 V3 V –
DVD MODE
MENU
DVD SET
DVD
operation
buttons
Numeric keys,
ENT
POWER ON POWER
STNBY
RETURN
ENTER/
Cursor
button
HOME THEATER CONTROLLER
RC-418M
OPEN/COLSE REC
AUDIO MUTING
DISC TRACK
DVD CD
PH TUN T2 T1
V1
STEREO
1 2 3
6 5 4
7
+ 10 0 ENT
8 9
SURROUND THX DSP
LEVEL + CH SEL Re-EQ
LEVEL – DIMMER LATE NIGHT
DIRECT DSP
V2 V3 V –
SAT, CABLE, VCR,
and TV MODE
HOME THEATER CONTROLLER
RC-418M