Intel IQ80219 - Manual (Page 18)

18 Board Manual
Intel® IQ80219 General Purpose PCI Processor Evaluation Platform
Introduction
1.7 Intel
®
IQ80219 Evaluation Platform Board Features
Table 5. Summary of Features
Feature Definition
Battery Backup Unit: Battery back up circuit for SDRAM – 64 MB for 72 hours.
Ethernet Port: Gigabit Ethernet Debugging/Download Port (using Intel® 82544).
Flash ROM: 8 MB Flash ROM 3.3 V – 16-bit Flash I/F.
Form & Factor:
Modified PCI long-card format – one Secondary PCI-X (SPCI-X) Expansion slots (right
angel connector).
General Purpose I/O: GPIO Pins are used as described in the appropriate section in this document
Hex Display: Two 7-segment Hex LED displays.
JTAG Port: ARM compliant JTAG Header.
Logic Analyzer:
Logic analyzer (mictor) interface on:
• SPCI-X bus
• Peripheral Bus
Interposer Card may be used for the memory bus – Information supplied separately.
Memory:
• PC1600 Double Data Rate (DDR) SDRAM (Clock rate: 100 MHz).
• 128 MB 64-bit (expandable to 1 GB).
• DIMM socket.
Onboard Power:
Board sources +1.25 V, +2.5 V, +3.3 V, +5 V, +12 V, and -12 V from primary PCI
connector.
• All core voltages are derived from 3.3 V supply.
PCI-X Bridge: IBM PCI-X Bridge.
Power LED: Power on (green) and FAIL (red) LED indicators.
Primary PCI: 64 bits 133/100/66 MHz PCI-X or PCI 66 MHz
RAID Support
Support for “RAID” Implementation – Ability to make the devices plugged in the
secondary expansion slots “Private”.
Secondary PCI:
• 1 x 64-bit PCI-X connector - 66 MHz.
• Intel ® 82544 Gigabit Ethernet Controller also on the secondary PCI-X.
Serial Port: One Serial Console Port (16C550 Compatible).