IBM X.25 - Manual (Page 56)

9 and 10 System Unit Address to call an adapter reset. Use the
values shown: 0Fh, E010h. (Not supported on the PCI
co-processor adapter.)
11 End-Record Delimiter. Value ';' or '$'. If this is the last
adapter in the ICAPARM file, set to '$'; otherwise, set to ';'.
Example 2 — for Multiple Co-Processor Adapters
The following example shows an ICAPARM.PRM file for 2 ISA and 2
PCI co-processor adapters in an ISA/PCI system:
# 1 1 1 1 32 F E 1 ;
# 6A 6F 2 2 2 2 C E 1 ;
# 1 1 5 32 F E 1 ;
# 2A 6E 1 1 5 32 C E 1 $
Field Number 1 2 3 4 5 6 7 8 9 1 11
In this example, the second physical PCI adapter has been assigned
logical card 0, and the first physical PCI adapter has been assigned
logical card 2. The other two adapters have been interspersed in
logical card order.
Note: For an explanation of the fields, see the field descriptions
under “Example 1 — for One Co-Processor Adapter” on
page A-3.
A-4 X.25 Co-Processor PCI GTO