IBM X.25 User Manual

Page 24

Step 4: Connect the Optional Adapter Cable

Use the following steps to connect your adapter cable.

Note: The optional adapter cables are described on page 1-3.

DANGER

Lightning protection. Do not connect or handle the
cable during a lightning storm.

1. Align the connector of the adapter cable with the co-processor

adapter connector at the rear of the system unit; it can fit
properly only one way.

2. Firmly press the adapter cable onto the co-processor adapter

connector.

3. Insert and tighten the screw at each side of the connector on the

cable.

4. Connect your device to the other end of the adapter cable.

The PCI co-processor adapter hardware installation is complete.

2-8

X.25 Co-Processor PCI GTO