InFocus LiteShow network adapter - Manual (Page 28)

InFocus LiteShow User’s Guide 23
Troubleshooting and Frequently Asked Questions
Troubleshooting
No LiteShow adapters appear in the list of LiteShow Manager. Try the following :
• Make sure that the LiteShow-enabled projector is in range with your computer and that the projector is
powered on.
• Click the Scan button.
• Make sure your computer has a valid IP address.
• Make sure that your computer’s wireless adapter is installed, plugged in, and enabled.
• Make sure that your computer’s wireless adapter antenna is switched on or extended.
• Make sure that your computer’s wireless adapter is configured to match the settings that display on the LiteShow
splash screen. Refer to information on Infrastructure and Ad-Hoc modes on page 20.
• For more detailed information, visit the InFocus website at www.infocus.com/service/liteshow.
Performance is poor; projection takes a long time. Try the following :
• Physically move the computer so that it is closer to the LiteShow adapter.
• Check to see that there are no interfering 802.11b or 2.4 GHz devices, such as Bluetooth wireless devices or micro-
wave ovens in use, in the area of the computer and LiteShow adapter. Cordless phones and microwave ovens may
also cause performance problems.
• Move the slidebar in the Preferences box to Better Performance.