InFocus LiteShow network adapter User Manual
Page 18
InFocus LiteShow User’s Guide
13
Project/Stop Button
If an Available or Unknown projector is selected, the Project button is enabled. The Project button is disabled if there
are no projectors found or selected.
When you select an available projector and click the Project button (or hit ), the screen projection applica- One of three things can happen when you select a projector whose status is Unknown: • The projector is found (using the latest network configuration information) and is available, and can project • The projector cannot be found (it’s either out of range or turned off), which generates an alert message. • The projector is found but is in use, which also generates an alert message. Scan/Skip Button Note : If the Scan button is disabled, consult the FAQ on page 26. The Scan button searches for LiteShow-enabled projectors and is active unless you are currently projecting. Once clicked, the Scan button opens an alert message that lets you know that current WLAN activities will be disrupted NOTE: On Macintosh systems, the Scan button becomes a Stop button and Scan/Skip/Stop options are available in If more LiteShow-enabled projectors are found, they appear in the list window. If your computer has more than one wireless card that support Advanced Feature set installed, you will be asked
tion begins. Once the screen projection application starts (that is, your desktop is shown as the projected image), the
button toggles to Stop and the status of the selected projector switches to In Use.
the contents of your desktop onto the projection screen.
while the scanning process occurs. After that, the Scan button changes to the Skip button. The status message in the
lower left corner of LiteShow Manager indicates which network is being scanned. If you want to force LiteShow Man-
ager to move on to the next network, click the Skip button.
the Scan menu.
which card you want to scan. You can choose to Skip the scan of a particular WLAN network.