InFocus LiteShow network adapter User Manual
Page 15
10
InFocus LiteShow User’s Guide
If you cannot see the LiteShow Splash Screen after you’ve attached it to a projector and powered the projector on, con-
firm that Auto Source is selected on your projector and that the M1 source is connected. If that doesn’t help, try power-
ing the projector off. Detach the LiteShow adapter from the projector. Wait a few minutes, until the projector ‘s LEDs let
you know it is ready to be powered on, then reattach the LiteShow adapter and power the projector back on again.
If you are having other trouble getting LiteShow to project, consult the "Troubleshooting" and "Frequently Asked
Questions" sections beginning on page 23.