beautypg.com

Lan control settings – InFocus DISPERINDAG IN3118HD User Manual

Page 30

background image

DLP Projector – User’s Manual

Lan Control Settings

Press the ENTER/SELECT button to enter the Lan Control Settings sub menu.

I

TEM

D

ESCRIPTION

Control By

Press the

◄► buttons to select projector remote command control.

Selecting RJ45 enables RJ45 control and disables the RS232 port.

Selecting RS232 enables RS232 control and disables the RJ45 network port.

When RS232 control is enabled, the serial port settings are fixed to:

9600 Baud;8-bits;No parity;1 Stop-bit;No flow control

(Range: RS232/ RJ45)

Note: this setting changes the standby power:

RS232 = <1W (Default)

RJ45 = <10W

 

Network State

Press the ENTER/SELECT button to enter the Network State sub menu.
See Network State on page 24.

– 23 –

See also other documents in the category InFocus Projectors: