IBM SpotLine M110 - Manual (Page 47)

47
6.0 Emulation
This section is provided only for those users who wish to know the
details of the emulation modes and protocols of the SpotLine M110
emulation mode. This chapter describes the “SPOT” emulation,
which is different from the standard terminal product. Unless your
operating system or application programs are unique, it is advised that
you ignore this chapter.
7.1 General
The SpotLine M110 always emulates 25 lines and 80 columns.
This emulation works in Wrap Off mode if a carriage return is not
entered before the end of the line.
7.2 Keyboard Control Characters
In ASCII mode, the following scan codes will be sent to the host computer: (All
values in Hexadecimal)
Key
Scan Code
Enter
0D
Backspace 08
Tab 09
Esc 1B
Delete 7F
Left Arrow 1F 08
Right Arrow 1F 06
Up Arrow 1F 0B
Down Arrow 1F 05