IBM SpotLine M110 - Manual (Page 33)

33
4.6 Function Key
Under some of the terminals emulation modes (ANSI/SCO and AT386/IX), it is
possible for user programs to program the function keys with special escape
sequences.
4.6.1 Function Key Reset
The key combination:
Scroll Lock + Space
will reset all the function keys to their default program values.
4.6.2 Programming function keys (F1- F24)
You can program the function keys to perform specific tasks, provided
that the SpotLine M110 is set to Ansi SCO or Ansi SCOv4 terminal
emulation mode.
Note: Function Key F13 is Shift F1, F14 is Shift F2, etc.
To program any function key to generate a specific string command to
your application, send the following escape sequences to the terminal:
Esc Q x “string_to_program”
or
Esc Q x ‘string_to_program”
where x denotes the required Function key as follows: