IBM SpotLine M110 - Manual (Page 36)

36
4. Activate mscreen from SpotLine Terminal
mscreen (enter)
Switching Sessions are now available
Alt F1.....session 1
Alt F2.....session 2
Alt F3.....session 3
Alt F4.....session 4
Alt F5.....session 5
Alt F6.....session 6
Alt F7.....session 7
Alt F8.....session 8
4.8 Telnet Session
When you have your SpotLine M110 setup in Telnet mode, the following screen
will appear immediately when you power up (or warm boot) the terminal:
If you know the IP address of the system you wish to connect to, enter it now. It
will be a number of the form:
194.2.32.52
(there must be 4 number sets delimited by periods)
Staff v 5.3dM Copyright © SpotLine Inc. 1999, 2000
USA 0212-00003
Telnet Connection
Internet Address (IP): ______________________
F1: Host Table
S1