beautypg.com

0 getting started, 1 installation – IBM SpotLine M110 User Manual

Page 10

background image

10


2.0 Getting Started


3.1 Installation

Follow these steps to install your SpotLine M110:

v Connect a VGA monitor to the monitor port.
v Connect your chosen keyboard
v Connect your terminal to the host server via the LAN using RJ-45

UTP Ethernet, if you wish to use it as a TCP/IP terminal. There are no
switches to set. The terminal will automatically detect which connector you
have used.

v Connect a suitable cable to either the SERIAL 1 or SERIAL 2 RS-

232 connectors, and the primary/other server for the terminal. See
Chapter 6 for the necessary cabling diagrams.

v Connect a suitable cable to the other serial port and another server if

so desired.

v Attach a parallel printer to the parallel port if needed.
v Connect a serial printer to the unused serial port if needed.