beautypg.com

3 use as a serial terminal – IBM SpotLine M110 User Manual

Page 40

background image

40

5.1.3 Use as a Serial Terminal

Under SCO Unix or XENIX, your SpotLine M110 should be
configured as an ANSI terminal, just like the terminal sessions on the
SCO system console.
The terminal type ANSI should be declared in the /etc./initial file as
well as /etc/ttytype.

The SpotLine M110 Terminal should be configured as follows:

Under Port communication parameters:

Set the speed, baud rate, etc.

Session Parameters:

Select the Option ANSI/SCO under emulation, or ANSI/SCOv4 if
you have SCO Open Desktop or SCO Open Server 5.

Select ASCII for the keyboard mode.

See also other documents in the category IBM Hardware: