Intel IQ80333 User Manual

Page 22

Getting Started

To bring up a HyperTerminal session on a Win32 platform: Go to Start, Programs, Accessories,
Communications, HyperTerminal

•

HyperTerminal setup screens:

— “Connection Description” Panel:

•

Enter name.

— “Connect To” Panel:

•

Select host com2 port (or whichever port you are using).

— Port Settings:

•

Bits per second: 115200

•

Data Bits: 8

•

Parity: none

•

Stop Bits: 1

•

Flow Control: none

— Start HyperTerminal:

•

Select Call from HyperTerminal panel.

— Reset or power up IQ80333.

— The Host screen reads:

For further information on the GDB/Insight Debugger, refer to the content of the GNUPro CD and/or
the GNUPro Debugging Tools manual. This setup assumes that RedBoot is Flashed on the board.

RedBoot(tm) debug environment - built dd:mm:yy, Mon dd 2004

Platform: 80333

RAM: 0xa0000000-0xa2000000

FLASH: 0x00000000 - 0x00800000, 64 blocks of 0x00020000 bytes each.

IP: 192.168.0.1, Default server: 0.0.0.0

RedBoot>