Getting started 2, 1 kit content, 2 hardware installation – Intel IQ80333 User Manual
Page 15: 1 first-time installation and test, Getting started
Customer Reference Board Manual
15
Getting Started
2
The 80333 is a software development environment for IQ80333. Software updates and additional
offerings from vendors can change frequently. To keep up-to-date, please visit
for the latest updates.
2.1
Kit Content
The 80333
Kit contains the following items:
•
IQ80333 with 400 MHz DDRII SDRAM DIMMs
•
Code|Lab* Development Environment from Accelerated Technology Incorporated*
•
JTAG Emulation unit
•
Serial Cable and RJ11 Adapter
2.2
Hardware Installation
Warning:
Static charges can severely damage the boards. Be sure you are properly grounded before removing
the board from the anti-static bag.
2.2.1
First-Time Installation and Test
For first-time installation, visually inspect the 80333 for any damage made during shipment. Follow
the host system manufacturer’s instructions for installing a PCI Express adapter card. The board is a
full-length host bus adapter card that requires a PCI Express slot free from obstructions. The IQ80333
has a x8 (read as ‘by eight’) edge connector.
Note:
Please note, at this time the IQ80333 does NOT work in a passive backplane. This is due to the
nature of the PCI Express linking protocol. For the I/O processor to successfully come out of reset,
a link must be established on the PCI Express bus. Without another device on a passive backplane
to ‘talk to’, a link is not established.