IBM 1412 - Manual (Page 64)

Planar Board
“Battery Assembly” on page 36
“Keyboard” on page 39
“CPU Thermal Plate” on page 41
“RTC Battery, CPU EMI Shield and Hard Disk Drive”
on page 42
“LCD Assembly” on page 45
“Upper Cover (Keyboard Bezel)” on page 47
2 1
4
3
Notes:
1. When removing the planar board from the base
cover, gently raise the side of the planar board facing
the rear I/O ports; then pull out the planar board.
2. When replacing the planar board, align the power
switch and power actuator. Make sure that the power
switch operates correctly before securing the screws.
Step
Size
(Quan-
tity)
Head &
Color
Torque Memo
1 M2.5 x
6L (2) Bind
head,
black 3.2
kgf-cm w/
nylock
paste
Note: Make sure you use the correct screw for replacement.
60 ThinkPad i Series 1400