IBM 1412 - Manual (Page 48)

PCMCIA Holder
“Battery Assembly” on page 36
“Modem Board Cover and Modem Board” on page 38
“Keyboard” on page 39
“CPU Thermal Plate” on page 41
1
Note: Before removing and replacing the PCMCIA holder,
make sure that the PCMCIA cards are removed
and the eject levers are not sticking out.
3
2
Attention: When removing the PCMCIA holder, pull them
up at an angle. It cannot be removed when pulled straight
up.
Step
Size
(Quan-
tity)
Head &
Color
Torque Memo
1 M2 x
14L (4) Pan
head,
silver 1.6
kgf-cm
Note: Make sure you use the correct screw for replacement.
44 ThinkPad i Series 1400