Installing and removing a processor, Installing a processor, Installing the processor fan heat sink – Intel D865GVHZ User Manual
Page 26: Installing a processor caution
Intel Desktop Board D865GVHZ Product Guide
26
Installing and Removing a Processor
Instructions on how to install the processor to the desktop board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure that AC power has been removed by
unplugging the power cord from the computer. Failure to do so could damage the processor and
the board.
To install a processor, follow these instructions:
1. Observe the precautions in “Before You Begin” on page 21.
2. Locate the processor socket and raise the socket lever completely.
3. Install the processor so that the corner with the triangle marking (A) is aligned with the corner
where the lever is attached to the socket (see Figure 4).
4. Lower the lever to its original position.
OM15028
m
PG
A4
78
B
m
PG
A4
78
B
A
m
PG
A4
78
B
Figure 4. Installing a Processor
Installing the Processor Fan Heat Sink
Desktop Board D865GVHZ has an integrated processor fan heat sink retention mechanism (RM).
For instructions on how to install the processor fan heat sink to the integrated processor fan heat
sink RM, refer to the boxed processor manual or the Intel World Wide Web site at: