Invacare 2GTR - Manual (Page 50)

ABS Curved Back without Mounting Hardware
Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R.
NOTE: CURV Metal Backs will only attach to Round Back Canes only. Hardware to attach to the Key
Slotted Extruded Back Canes is not available.
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist
for additional information on ordering a warranty ABS Back Pan replacement.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
#2 Back Cushion Assembly (16" - 19" W)
Overall
Back
Height
Material
Back
Height
16" Wide 17" Wide 18" Wide 19" Wide
1097399 1097398 1097397 1097396 15" 20"
1097406 1097405 1097404 1097403 16" 21"
1097413 1097412 1097411 1097410 17" 22"
1097420 1097419 1097418 1097417 18" 23"
1097427 1097426 1097425 1097424 19" 24"
1097434 1097433 1097432 1097431 20" 25"
1097441 1097440 1097439 1097438 21" 26"
Back cover and foam are sold as a back cushion assembly only.
#2 Back Cushion Assembly (20" - 22" W)
Overall
Back
Height
Material
Back
Height
20" Wide 21" Wide 22" Wide
1097402 1097401 1097400 15" 20"
1097409 1097408 1097407 16" 21"
1097416 1097415 1097414 17" 22"
1097423 1097422 1097421 18" 23"
1097430 1097429 1097428 19" 24"
1097437 1097436 1097435 20" 25"
1097444 1097443 1097442 21" 26"
49
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 03-026