IronPort Systems ZyAIR B-4000 User Manual
Page 208
ZyAIR B-4000 Hot Spot Gateway
23-4 Troubleshooting
Table 23-7 Troubleshooting the Statement Printer
STEPS CORRECTIVE
ACTION
1
Make sure the statement printer is connected to a power source and is turned on.
2
Check that the statement printer is connected to the port labeled DEVICE PORT.
3
Make sure there is enough printing paper in the statement printer.
4
Make sure you set the ZyAIR to require authentication before allowing Internet access, see
the Wizard Setup screens or the Authentication chapter.