Enjoying music in the remote zone, Zone 2 operation from the main room, Zone 2 (a-bus or ir) operation in the zone 2 room – Integra DTM-5.3 User Manual

Page 27: The zone 2 indicator will light up continuously, The power to the zone 2 devices turned on, 1 press the on button on the remote controller, 2 select an input source

Enjoying music in the remote zone

Zone 2 operation from the main room

To select a source for the zone 2 room other than the source
selected for the main room.

1 Press the Zone 2 button, the Zone 2 indicator flashes.
2 Select an input source within five seconds.

The Zone 2 indicator will light up.

Example: When the CD button is pressed.

If you want to change the source for the zone 2 room to the
same source that is selected for the main room, press the Zone 2
button again until “Z2 SRC” appears in the display.

To select the same source as that of the main room to zone 2
room.

1 Press the Zone 2 button twice while the Zone 2 indicator

is flashing (within 5 seconds).

The Zone 2 indicator will light up continuously.

Notes:

• If you set a sleep time using the Sleep button, it will also func-

tion for the zone 2 room.

• If the source for the main room is selected as the source for the

zone 2 room, and the source for the main room is changed, then
the source for the zone 2 room will change as well.

• If you select FM (or AM) using the input source buttons when

the source for the zone 2 room is set to AM (or FM), the output
for the zone 2 room also changes to AM (or FM).

• When you are using the zone 2 room, the

system will not

function.

• If you are not using the Zone 2 function, press the Off button to

turn off the Zone 2 indicator.

• Even if the main room device is in Standby mode, you can

adjust the zone 2 room device settings. In this case, the display
turns off and the Zone 2 indicator flashes.

Zone 2 (A-BUS or IR) operation in the zone 2 room

1 Press the On button on the remote controller.

The power to the Zone 2 devices turned on.

2 Select an input source.

Notes:

• If you select FM or AM, use the Preset

buttons to select a

preset channel.

• Pressing the Standby button will place the Zone 2 device in

Standby mode.

Standby/On

Speakers

Phones

Bass

Treble

Balance

Master Volume

Video

Tape 2

Monitor

Tape 1

Phono

DVD

Zone 2

Off

Memory

Clear

Character

Direct

Tuning

FM Mode

Display

Standby

DTM-5.3

1 ABC

2 DEF

3 GHI

4 JKL

5 MNO

6 PQR

7 STU

8 VWX

9 YZ-

Direct Tuning

0/10

Scan

Input selector buttons

Zone 2

Zone 2 indicator

Off

Zone 2

Preset
/

On, Standby

Input selector

Off

AUT

AUTO

MONO

AUT

AUTO

MONO