MITSUBISHI ELECTRIC LT-40133 - Manual (Page 41)

5. TV Menu Settings 41
Setup Menu Options
Language
English
Spanish Display on-screen menus in either English or Spanish.
Note: To listen to audio in other languages (when available), see the section
on the
AV menu, Audio submenu, and refer to either Listen To > SAP (analog
signal) or Language (digital signal).
Scan
Ant-1 Air
Ant-1 Cable
Ant-2 Air
Ant-2 Cable Scan memorizes broadcast channels to make them easier to find. To start
channel memorization:
1. Highlight one of the input selections based on your connection to
ANT 1
or ANT 2:
• Air when connected to an indoor or outdoor antenna.
• Cable when connected to direct cable (no cable box)
2. Press to highlight START.
3. Press ENTER to start channel memorization for the selected input.
Notes on Scan and channel memorization:
• Channel memorization may take up to 15 minutes to complete.
• To stop channel memorization before completion, press
CANCEL.
• When watching TV, press CH to move through memorized channels.
• If you restart channel memorization, previously memorized channels for that antenna will be erased.
• To add a digital channel that does not appear in the
Edit menu without repeating channel memorization:
1. Look up the physical channel number for the new digital channel. www.antennaweb.org can help you
find the physical channel number.
2. Tune to any channel on the ANT 1 or ANT 2 input your antenna is connected to.
3. Use the number keys and
—
CANCEL to enter the physical channel number followed by “-1” and ENTER. For
example, for physical channel 36, press
3 6 — CANCEL 1 ENTER.
The TV will search for a digital channel on the channel 36 frequency. When it finds the channel, it will:
a. Add the channel to memory.
b. Change the channel number to the virtual channel number sent by the broadcaster.
c. Add to memory any associated sub-channels.
• If using TV Guide Daily (model LT-40134 only), the channels displayed and their order are independent of the
TV’s channel memorization. Refer to Appendix C for more information.
Setup Menu
Setup menu, Scan option
Use the Setup menu to:
• Select English or Spanish for menus and on-screen
text.
• Scan the channels available for the antenna or cable
service connected to the ANT 1 or ANT 2 jacks.
• Edit channel options, including channel locking.
• Set the TV’s internal clock.
• Set the TV Timer to turn on the TV automatically at
a designated time.
• Set the energy mode for power consumption when
the TV is powered off.