MITSUBISHI ELECTRIC LT-40133 - Manual (Page 14)

14 2. TV Setup
• Parental Locks. Restrict TV viewing (by
program rating, by channel, or by time of day)
and disable side panel controls. See the
Lock
> Parent menu, the Lock > Side Panel menu,
and Setup > Edit > Lock.
• Video Settings. Change video adjustments to
get the best picture for your viewing conditions.
See “AV Menu.”
• Audio Settings. Turn on or off internal speak-
ers, adjust volume level and tone, turn surround
effects on or off, select Stereo/SAP/Mono,
select language, and turn “Level Sound” feature
on or off.
Note: You may wish to change the Picture Mode from
the default Brilliant to either Bright or Natural,
which are suitable for most home viewing envi-
ronments.
2. To program the remote control to operate A/V
devices not under NetCommand control, see
Appendix D, “Programming the Remote Control.”
TV Care
• General Cleaning. See the cleaning recom-
mendations under “
Important Information
About Your TV.”
Assistance
• For troubleshooting, service, and product
support, see Appendix E.
• For warranty information, see the TV warranty
in the back of this book.
Installing the Remote Control Batteries
1. Remove the remote control’s back cover by gently
pressing in the tab and lifting off the cover.
2. Load the batteries, making sure the polarities (+)
and (-) are correct. For best results, insert the
negative (-) end first.
3. Snap the cover back in place.
2
1
The remote control requires two AA alkaline batteries.
When You First Power On the TV
Turning the TV On or Off
To turn the TV on or off, point the remote control at
the front lower-right corner of the TV and press the
POWER button. Alternatively, press the POWER button
on the side panel of the TV.
Choosing a Language for Menus
1. Power on the TV for the first time.
2. Press to select either
English or Spanish
for all menus. You can later change the language
selection through the
Setup menu Language
option.
When you first power on the TV, the Welcome screen lets
you change the menu language.
Initial TV Setup
Use the Setup menu for basic TV setup options.
1. Press MENU to open the Main menu.
2. Press to highlight the Setup icon and display the
Setup menu.
Setup menu highlighted in TV Main menu