3 tv connections, Before you begin, Hdtv cable box or satellite receiver with – MITSUBISHI ELECTRIC LT-40133 User Manual
Page 19: Component video, Tv connections
19
3
TV Connections
*/165
47*%&0
7*%&0
-
.0/0
3
3
3
:
1C
1S
3
-
-
.0/0
-
.0/0
"73065
%7**/
"6%*0
$0.10/&/5
*/1654
"73
"6%*0065165
1$%7*
"6%*0*/165
$0.10/&/5
*/1654
JQQJ
-
"6%*0
3
: 1C 1S
$"#-&*/PS
4"5&--*5&*/
*ODPNJOHGSPN
$BCMF4FSWJDFPS
4BUFMMJUF%JTI
57#BDL1BOFM
$BCMF#PY
PS4BUFMMJUF
3FDFJWFS
Figure 1. Connecting an external HDTV receiver with
component video connections
Auto Input Sensing
The TV’s Auto Input Sensing feature automatically rec-
ognizes most connections and prompts you to identify
the type of device connected. See chapter 2, “TV
Setup,” for more on Auto Input Sensing.
Connection Types
Review the connection types available on your input
devices and use inputs that will give the best video
quality. For example, choose HDMI over component
video, and choose component video over S-video or
composite video.
Picture Quality
For best picture quality, route signals directly from the
source device to the TV; avoid routing video signals
through an A/V receiver, for example.
If your cable box or satellite receiver has an HDMI
output, use the connections for HDMI devices
described later in this chapter.
Required: RCA component video cables, left/right
analog stereo audio cables.
1. Connect the cable from the outside cable or satel-
lite service to
CABLE IN or SATELLITE IN on the
cable box or satellite receiver. See your device’s
owner’s guide for instructions and cable compat-
ibility.
2. Connect RCA-type cables from the
Y Pb Pr
outputs on the HDTV cable box or satellite receiver
to
COMPONENT INPUTS on the TV back panel
#1, matching the colored green, blue, and red
connections.
3. Connect left (white) and right (red) audio cables
from the HDTV cable box or satellite receiver to
COMPONENT INPUTS L (MONO) and R on the TV
back panel #1.
Note: To hear digital surround sound, connect the digital
audio output from your cable box or satellite re-
ceiver directly to your digital A/V receiver.
Sound Quality
For best surround sound audio quality, route audio
signals from the source device directly to your A/V
receiver or sound system whenever possible.
IMPORTANT
Accessory items such as cables, adapters,
splitters, or combiners required for TV
connections are not supplied with the TV.
These items are available at many electronics
stores.
Before you Begin
HDTV Cable Box or Satellite Receiver with Component Video