Millennium Enterprises Integrated Modeling Amplifier - Manual (Page 80)

5. Now to assign the CC number, just turn the <4> knob until you have reached the desired CC. The display will now read something like
this:
6. Press the button to exit the Foot controller setup menu.
Assigning MIDI Control to the Expression Pedals
This series of menus and submenus allows MIDI setup of the Expression pedals of the J-12. There are two procedures you must do in order for
the Expression pedals to work properly with MIDI:
1. Assign CC Number
2. CC Transmit Channel
Assign CC Number to Expression Pedals - This option allows you to choose the MIDI CC numbers you want to use for sending
continuous control messages using any one of the 4 expression pedal options. These assignments can be done on pages 11 and 12 of the
Utility menu. From the Factory, the expression pedal(s) are not pre-assigned to any MIDI CC number. To assign which CC number is sent
from the expression pedal(s), do the following.
1. Press the button once. The display appears something like this:
2. Turn the knob until you reach page 11 and the display will appear something like this:
CCSnd: Exp1 Exp2
2
FACTORY USER
1
CHANGED LINK
OFF 2
CHANGED LINK
OFF 3
CHANGED LINK
4
CHANGED LINK
PAGE
11
OF
16
WAH TUBE EQ L/R OUTS
DIGITAL
CLIP
# b
GATE
Stereo Cab: 4x12 Tuner
2
FACTORY USER
2 1
CHANGED LINK
2
CHANGED LINK
2 3
CHANGED LINK
Off 4
CHANGED LINK
PAGE
1
OF
16
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
# b
GATE
J12 FC:Bank FS=Tog CCTran
2
FACTORY USER
1
CHANGED LINK
1 2
CHANGED LINK
6 3
CHANGED LINK
127 4
CHANGED LINK
PAGE
10
OF
16
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
# b
GATE
Section - 6 The J-12 Foot Controller Johnson Millennium
User Guide
72