Millennium Enterprises Integrated Modeling Amplifier - Manual (Page 39)

Storing the Default
1. When you have the name as you want it to read, press the button. The top line of the display reads:
Store To: [Name]
This screen allows you to select the location of the new default. Note that when the default is stored, it is stored in the User bank of defaults
because factory defaults cannot be overwritten.
2. Use the <2> knob to select the default number where you want to store the new default.
3. Press the button again. The default is saved off and you are taken to page 1 of the FX edit menu.
The newly created default is now loaded, and can now be recalled at any time.
4. To abort the procedure, push either the button to take you to Preset mode, the button to take you to FX edit mode,
or the button to take you into Utility mode, depending upon which mode you want to enter.
Editing a Module
Each of the Millennium’s effects has several usable factory defaults, however, you may want to tweak the parameters of the module in order to
get the right sound you’re looking for. The parameters of each effect module are reached through a series of pages.
1. Press the button. The display looks something like this:
When you first enter FX edit mode (by pressing the button), you are taken to the Analog Wah section. Turn the
wheel to scroll through the modules until you reach a digital effect module. Notice that as you scroll through the different modules, the
currently selected module will flash in the Effect routing matrix of the display. Once you have reached a module in the digital effects section
that you want to edit, use the knob to scroll to the particular parameters.
Notice: Anytime a change is made to either an effect module or default, the Changed icon will appear directly below the effected
parameter within the module or default and the button will light.
Wah Pedal Toe Heavy
2
FACTORY USER
byp 1
CHANGED LINK
%kHz
msdB 1 2
CHANGED LINK
%kHz
msdB
LINK
%kHz
msdB 1 4
LINK
PAGE
1
OF
1
WAH TUBE EQ L/R OUTS
DIGITAL
CLIP
#
b
GATE
BANK
Johnson Millennium
User Guide
Section - 4 Editing Modules
31