Millennium Enterprises Integrated Modeling Amplifier - Manual (Page 23)

Getting Around In the Operating System
The menu structure of your Millennium has been specially designed to be easy to use. The display shows the information you need, but to
make things even easier for you, illumination of the front panel buttons offers additional operating information.
The front panel buttons give you information in one of two ways:
1 - If the button is dim, its function is inactive. Pressing a dim button causes it to light brightly and its function becomes the active item in
the display. If the dim button doesn’t light after you press it, the button is unavailable.
2 - If the button is bright, its function is active.
Preset Mode
Preset mode allows you to scroll through the Factory and User presets using the wheel. When your Millennium is turned on,
it sets itself to Preset mode. Preset mode is active when the button is lit and a preset name is present on the information line (top
line) of the display.
FX Edit Mode
This mode allows you to edit:
1. Digitally controlled Analog Wah
2. FX loop
3. Amp Models
4. Noise Gate
5. Selecting Effect Configurations
6. FX Modules
7. Output Mode of your Presets
Use the button to enter the FX Edit mode.
A helpful hint: If you look at the Effect Routing matrix while you press the FX button, the currently selected module will flash.
Your Millennium uses “Pages” to navigate within an effect. A “Page” is a group of up to four effect parameters that appear on the screen at one
time. Use the knob to move through the pages in the menu. Note that as you scroll through the pages, the page indicator in the
lower left corner of the display changes to show the currently displayed page number.
Utility Mode
From the initial power-up of the unit, access to all of the menu pages of the utility mode can be made by simply pressing the
button located on the front panel of the unit. From this point, the display will tell you that you are in the utility mode and you can scroll
through the options by turning the knob.
Assign Mode
Once the Millennium is in assign mode, all modifier assignments can be made. This assign mode gives you the ability to assign LFOs, dynamic
modifiers, foot switches and expression pedals to almost any parameter in the Millennium. Access to this function is located on the front panel
or in the utilities pages within the Millennium. For more information on assignments, please see pg.56.
Johnson Millennium
User Guide
Section - 2 Setting Up
15