Millennium Enterprises Integrated Modeling Amplifier - Manual (Page 27)

Selecting A Preset
When you first turn on your Millennium, you are in Preset mode, and the display will appear something like:
To select a preset, do the following:
1. Make sure Preset mode is selected (the button will be brightly lit). If the button is dim, press it once to return to
preset mode.
2. Use the button to select the preset bank (factory or user). Successive presses of the button toggle between the
factory and user bank of presets.
3. Using the wheel, scroll to the preset you want to use.
Using the Tuner
The Tuner of the Millennium can be accessed two ways. Either in page l of the Utility menu or by using the optional Johnson Amplification
J-12 foot controller. The following explains both modes of operation.
Utility Menu Tuner Mode
1. Press the button once. The display reads:
2. Now turn the <4> knob to turn the tuner on. The display will now appear something like this:
?? TUNER A=440 Output 127
FACTORY USER
% %kHz
msdB 3 4
CHANGED LINK CHANGED LINK
100
CHANGED LINK
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
# b
GATE
MIDI
SOLO
EQ DIST
Stereo Cab:4x12 Tuner
127
FACTORY USER
2 2 1 2 %kHz
msdB 3 4
CHANGED LINK CHANGED LINK
Off
CHANGED LINK
PAGE
1
OF
16
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
GATE
MIDI
BANK SOLO
EQ DIST
2
Clean Comp Delay
2
USER
%kHz
ms
dB
0 1
CHANGED LINK
%kHz
ms
dB
0 2
CHANGED LINK
%kHz
ms
dB
0 3
CHANGED LINK
% 100 4
CHANGED LINK
PAGE OF
11
WAH TUBE EQ L/R OUTS
CLIP
# b
GATE
Johnson Millennium
User Guide
Section - 2 Setting Up
19