beautypg.com

Moxa Technologies NPort 5600 User Manual

Page 36

background image

NPort 5600 Series User’s Manual

Configuring NPort Administrator

5-6

Method

Function Definition

Static

User defined IP address, Netmask, Gateway.

DHCP

DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server

DHCP/BOOTP DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time

Server, or BOOTP Server assigned IP address (if the DHCP Server does not
respond)

BOOTP

BOOTP Server assigned IP address

IP Address

Setting

Factory Default

Necessity

E.g., 192.168.1.1 (IP addresses of the form
x.x.x.0 and x.x.x.255 are invalid.)

192.168.127.254 Required

An IP address is a number assigned to a network device (such as a computer) as a permanent
address on the network. Computers use the IP address to identify and talk to each other over the
network. Choose a proper IP address which is unique and valid in your network environment.

Netmask

Setting

Factory Default

Necessity

E.g., 255.255.255.0

255.255.255.0

Required

A subnet mask represents all the network hosts at one geographic location, in one building, or on
the same local area network. When a packet is sent out over the network, the NPort will use the
subnet mask to check if the desired TCP/IP host specified in the packet is on the local network
segment. If the address is on the same network segment as the NPort, a connection is established
directly from the NPort. Otherwise, the connection is established through the given default
gateway.

Gateway

Setting

Factory Default

Necessity

E.g., 192.168.1.1

None

Optional

A gateway is a network gateway that acts as an entrance to another network. Usually, the
computers that control traffic within the network or at the local Internet service provider are
gateway nodes. NPort needs to know the IP address of the default gateway computer in order to
communicate with the hosts outside the local network environment. For correct gateway IP
address information, consult the network administrator.

IP Configuration

Setting

Factory Default

Necessity

Static

DHCP

DHCP/BOOTP

BOOTP

Static Required