Multi-Tech Systems Multimodem RJ-9 - Manual (Page 47)

Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B) 47
Tools > Service Status
This screen displays the status of each service that is available at run time. The first column lists the services
available at run time; the second column identifies the configuration (enabled/disabled); the third column reports the
current status of each service.
Tools > Firmware Upgrade
Firmware Upgrade
Browse File for Upgrade: Click the Browse button to open the file that allows you to locate the upgrade
file. When found, highlight the file name and press Enter so that the file name displays in the text box. Then
click the Upgrade button.
Important Notes:
•
Firmware Upgrade is available only when Firmware Upgrade Configuration is enabled on the IP
Setup screen.
• The new firmware is written into the flash.
• A Firmware Upgrade will take at least 150 seconds while the firmware is downloaded. Do not cycle
power during this time.