Packet filters > advanced – Multi-Tech Systems Multimodem RJ-9 User Manual

Page 42

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)

Packet Filters > Advanced

Connection Tracking

H323:

Enable/disable the forwarding of H323 packets across the firewall.

PPTP:

Enable/disable PPTP Packet Pass-through (PPTP NAT support).

ICMP Configuration

The Internet Control Message Protocol (ICMP) is used to test the network connections and the functionality
of the firewall and is also used for diagnostic purposes. ICMP on Firewall and ICMP Forwarding always
apply to all IP addresses; i.e., Any. When these are enabled, all IP hosts can Ping the firewall (ICMP on
Firewall) or the network behind it (ICMP Forwarding).

ICMP on LAN:

Enable/disable the transfer of ICMP packets on the LAN interface.

ICMP on WAN:

Enable/disable the transfer of ICMP packets on the WAN interface.

ICMP Forward:

Enable/disable the forwarding of ICMP packets through the firewall into the local
network.

Submit

Click the Submit button to save these settings.

Note:

You must click Save and Restart once you have

completed and submitted all the screens on which you have made changes.

This manual is related to the following products:

Multimodem RJ-45