Memorex MVDR2100 - Manual (Page 46)

45
RECORDING (CONTINUED)
NOTE:
•
The length of one-touch recording is determined by the disc capacity and recording quality as set on page 42.
ONE TOUCH RECORDING
Set the options as desired (see the page 43). Press the
OPEN/CLOSE button
1 to close the disc tray. “LOAD” will
appear on the screen and in the display. Press the
SOURCE button
2 to select the desired recording source.
3
1
2
Press the ON/STANDBY button to turn on the unit; the
STANDBY indicator will go out.
1
Press the OPEN/CLOSE button to open the disc tray,
“OPEN” will appear on the screen and in the display. Insert
a DVD+R or DVD+RW with the label side facing up on the
disc tray.
To start recording, press the RECORD button 1 ; RECORD
will appear on the TV screen and the unit will start
recording after a few seconds. Press the RECORD button
1 again and the unit will record for 30 minutes. Repeatedly
press the RECORD button 1 to increase the recording by
30 minutes each press. To stop recording before the preset
stop time, press the STOP (
■ ) button 2 ; STOP will appear
on the TV screen and the unit will stop recording after a few
seconds.
1
2
4
2
1